18 Inch DIY Floating Shelves (3 Count)

Some walls only give you a few inches to work with—beside the bathroom mirror, above the toilet, over a nightstand. The Homeforia 18-inch floating shelf set is built for exactly those spots, adding real storage and a finished look without crowding the room. The wood is the point. Each shelf is solid pine—sanded smooth and left completely unfinished, so you control the final look. Stain it to match existing cabinetry, paint it any color, oil it for a natural matte finish, or seal it clear to keep the raw tone. What you will not find is fiberboard or a printed wood-look wrap pretending to be lumber. Strength is where cheap shelves fail. Each shelf carries up to 50 lbs anchored into a wall stud, thanks to a heavy-duty metal bracket that slides fully inside the shelf body. Nothing shows from below or the side, so the shelf appears to float while the hardware quietly does the work. At 18 inches wide and 6.5 inches deep, a pair handles the bottles on a bathroom counter, rolled towels, a small plant and a candle, or a stack of books beside the bed. Hang them one above the other for a compact tower, or split them between two rooms. The 6.5-inch depth is a deliberate choice. It is sized as a display ledge—deep enough to hold books upright, framed art, potted plants, candles, mugs and everyday bottles, and trim enough that it never juts into a walkway or blocks a sightline. In a bathroom, hallway, or behind a desk, that restraint is the whole point: storage that reads as architecture rather than furniture bolted to the wall. Installation is straightforward: the concealed heavy-duty bracket, screws, and wall anchors are all in the box with clear instructions. Anchor into studs to reach the full 50 lb rating per shelf, or use the included anchors for drywall. Because raw pine is a living material, knots and grain differ between boards and stain can absorb unevenly in places—test your finish on a back edge first. Backed by Homeforia’s satisfaction guarantee.